FCFBMH4516HM851NT [TAIYO YUDEN]
Ferrite Chip, 1 Function(s), 1.5A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1806, 2 PIN;
| 型号： | FCFBMH4516HM851NT |
| 厂家： | 
TAIYO YUDEN (U.S.A.), INC |
| 描述： | Ferrite Chip, 1 Function(s), 1.5A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1806, 2 PIN |
| 文件： | 总15页 (文件大小：4568K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2012. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■ Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
tors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign Exchange and For-
eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
WAVE
REFLOW
■PARTS NUMBER
△＝Blank space
F
B
△
M
J
3
2
1
6
H
S
8
0
0
－
⑦
T
△
⑨
①
②
③
④
⑤
⑥
⑧
①Series name
⑤Material
Code
HS
Code
FB
Series name
Ferrite bead
Material
Refer to impedance curves
for material differences
HM
②Shape
Code
M
HL
Shape
Rectangular chip
⑥Nominal impedance
Code
（example）
330
Nominal impedance［Ω］
③Characteristics
Code
Characteristics
Standard
33
J
111
110
H
High Impedance type
132
1300
④Dimensions（L×W）
Code
⑦Impedance tolerance
Dimensions
（L×W）［mm］
1.6×0.8
Code
－
Impedance tolerance
±25％
Type（inch）
1608
2125
2012
2016
3216
3225
4516
4525
4532
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
3225（1210）
4516（1806）
4525（1810）
4532（1812）
N
±30％
2.0×1.25
⑧Packaging
2.0×1.6
3.2×1.6
3.2×2.5
4.5×1.6
4.5×2.5
4.5×3.2
Code
T
Packaging
Taping
⑨Internal code
Code
△
Internal code
Standard
／
■STANDARD EXTERNAL DIMENSIONS / STANDARD QUANTITY
Recommended Land Patterns
Surface Mounting
Type
A
B
C
1.0
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to these products is reflow soldering only.
FB MJ1608
FB MJ2125
FB MJ3216
FB MJ4516
FB MH1608
FB MH2012
FB MH2016
FB MH3216
FB MH4516
FB MH3225
FB MH4525
FB MH4532
1.0
1.0
1.2
2.2
3.5
1.0
1.2
1.2
2.2
3.5
2.2
3.5
3.5
1.4
1.65
2.0
1.4
1.75
1.0
2.0
1.0
1.4
1.65
2.0
1.4
1.4
2.0
1.75
1.4
2.0
2.9
1.75
1.75
2.9
3.7
Unit：mm
Standard quantity [pcs ]
Type
L
W
T
e
Paper tape
Embossed tape
FB MJ1608
（0603）
1.6±0.2
（0.063±0.008）
2.0±0.2
0.8±0.2
（0.031±0.008）
1.25±0.2
0.8±0.2
（0.031±0.008）
0.85±0.2
0.3±0.2
（0.012±0.008）
0.5±0.3
4000
4000
－
－
FB MJ2125
（0805）
－
（0.079±0.008）
3.2±0.3
（0.049±0.008）
1.6±0.2
（0.033±0.008）
1.1±0.2
（0.020±0.012）
0.5±0.3
FB MJ3216
（1206）
2000
2000
－
（0.126±0.012）
4.5±0.3
（0.063±0.008）
1.6±0.2
（0.043±0.008）
1.1±0.2
（0.020±0.012）
0.5±0.3
FB MJ4516
（1806）
－
（0.177±0.012）
1.6±0.1
（0.063±0.008）
0.8±0.1
（0.043±0.008）
0.8±0.1
（0.020±0.012）
0.3±0.15
FB MH1608
（0603）
4000
4000
－
（0.063±0.004）
2.0±0.2
（0.031±0.004）
1.25±0.2
（0.031±0.004）
0.85±0.2
（0.012±0.006）
0.5±0.3
FB MH2012
（0805）
－
（0.079±0.008）
2.0±0.2
（0.049±0.008）
1.6±0.2
（0.033±0.008）
1.6±0.2
（0.020±0.012）
0.5±0.3
FB MH2016
（0806）
2000
2000
1000
2000
1000
2000
（0.079±0.008）
3.2±0.3
（0.063±0.008）
1.6±0.2
（0.063±0.008）
1.6±0.2
（0.020±0.012）
0.5±0.3
FB MH3216
（1206）
－
（0.126±0.012）
3.2±0.3
（0.063±0.008）
2.5±0.3
（0.063±0.008）
2.5±0.3
（0.020±0.012）
0.5±0.3
FB MH3225
（1210）
－
（0.126±0.012）
4.5±0.3
（0.098±0.012）
1.6±0.2
（0.098±0.012）
1.6±0.2
（0.020±0.012）
0.5±0.3
FB MH4516
（1806）
－
（0.177±0.012）
4.5±0.4
（0.063±0.008）
2.5±0.3
（0.063±0.008）
2.5±0.3
（0.020±0.012）
0.9±0.6
FB MH4525
（1810）
－
（0.177±0.016）
4.5±0.4
（0.177±0.016）
（0.098±0.012）
3.2±0.3
（0.126±0.012）
（0.098±0.012）
3.2±0.3
（0.126±0.012）
（0.035±0.024）
0.9±0.6
（0.035±0.024）
FB MH4532
（1812）
－
Unit：mm（inch）
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
104
■PARTS NUMBER
Standard type
●FB MJ1608
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
FB MJ1608HS280NT
FB MJ1608HM230NT
RoHS
RoHS
28
23
±30％
±30％
100
100
0.007
0.007
4.0
4.0
0.8 ±0.2
0.8 ±0.2
●FB MJ2125
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ2125HS420-T
FB MJ2125HS250NT
FB MJ2125HM330-T
FB MJ2125HM210NT
FB MJ2125HL8R0NT
RoHS
RoHS
RoHS
RoHS
RoHS
42
25
33
21
8
±25％
±30％
±25％
±30％
±30％
100
100
100
100
100
0.008
0.004
0.008
0.004
0.008
4.0
6.0
4.0
6.0
4.0
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
●FB MJ3216
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ3216HS800-T
FB MJ3216HS480NT
FB MJ3216HM600-T
FB MJ3216HM380NT
FB MJ3216HL160NT
RoHS
RoHS
RoHS
RoHS
RoHS
80
48
60
38
16
±25％
±30％
±25％
±30％
±30％
100
100
100
100
100
0.010
0.005
0.010
0.005
0.012
4.0
6.0
4.0
6.0
4.0
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
●FB MJ4516
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ4516HS111-T
FB MJ4516HS720NT
FB MJ4516HM900-T
FB MJ4516HM560NT
FB MJ4516HL230NT
RoHS
RoHS
RoHS
RoHS
RoHS
110
72
±25％
±30％
±25％
±30％
±30％
100
100
100
100
100
0.014
0.007
0.014
0.007
0.014
4.0
6.0
4.0
6.0
3.5
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
1.1 ±0.2
90
56
23
High impedance type
●FB MH1608
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
FB MH1608HM470-T
FB MH1608HM600-T
FB MH1608HM101-T
FB MH1608HM151-T
FB MH1608HM221-T
FB MH1608HM331-T
FB MH1608HM471-T
FB MH1608HM601-T
FB MH1608HM102-T
FB MH1608HL300-T
FB MH1608HL600-T
FB MH1608HL121-T
FB MH1608HL221-T
FB MH1608HL331-T
FB MH1608HL471-T
FB MH1608HL601-T
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
47
60
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
±25％
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
0.020
0.025
0.035
0.050
0.070
0.130
0.150
0.170
0.350
0.028
0.045
0.130
0.170
0.210
0.350
0.450
3.5
3.0
2.0
2.0
1.5
0.9
0.7
0.7
0.5
2.5
1.8
0.9
0.7
0.6
0.5
0.4
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
0.8 ±0.1
100
150
220
330
470
600
1000
30
／
60
120
220
330
470
600
●FB MH2012
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH2012HM800-T
FB MH2012HM121-T
FB MH2012HM221-T
FB MH2012HM331-T
RoHS
RoHS
RoHS
RoHS
80
±25％
±25％
±25％
±25％
100
100
100
100
0.025
0.032
0.060
0.080
2.7
2.5
2.0
1.8
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
0.85 ±0.2
120
220
330
●FB MH2016
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH2016HM121NT
FB MH2016HM251NT
RoHS
RoHS
120
250
±30％
±30％
100
100
0.015
0.050
4.5
2.0
1.6 ±0.2
1.6 ±0.2
●FB MH3216
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH3216HM221NT
FB MH3216HM501NT
RoHS
RoHS
220
500
±30％
±30％
100
100
0.020
0.070
4.0
2.0
1.6 ±0.2
1.6 ±0.2
●FB MH3225
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH3225HM601NT
FB MH3225HM102NT
FB MH3225HM202NT
RoHS
RoHS
RoHS
600
1000
2000
±30％
±30％
±30％
100
100
100
0.042
0.100
0.130
3.0
2.0
1.2
2.5 ±0.3
2.5 ±0.3
2.5 ±0.3
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
105
■PARTS NUMBER
●FB MH4516
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
Parts number
EHS
Impedance tolerance
±30％
FB MH4516HM851NT
RoHS
850
100
0.100
1.5
1.6 ±0.2
●FB MH4525
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH4525HM102NT
FB MH4525HM162NT
RoHS
RoHS
1000
1600
±30％
±30％
100
100
0.060
0.130
3.0
2.0
2.5 ±0.3
2.5 ±0.3
●FB MH4532
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MH4532HM681-T
FB MH4532HM132-T
FB MH4532HM202-T
RoHS
RoHS
RoHS
680
1300
2000
±25％
±25％
±25％
100
100
100
0.028
0.060
0.130
4.0
3.0
1.3
3.2 ±0.3
3.2 ±0.3
3.2 ±0.3
●High current type
Parts number
Nominal impedance
（Ω）
Measuring frequency
［MHz］
DC Resistance
［Ω］（max.）
Rated current
［A］（max.）
Thickness
［mm］
EHS
Impedance tolerance
FB MJ1608HS220NTR
FB MJ1608HS280NTR
FB MJ1608HM180NTR
FB MJ1608HM230NTR
RoHS
RoHS
RoHS
RoHS
22
28
18
23
±30％
±30％
±30％
±30％
100
100
100
100
0.004
0.006
0.004
0.006
7.5
6.0
7.5
6.0
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
0.8 ±0.2
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
106
■ ELECTRICAL CHARACTERISTICS
FBMJ1608
FBMJ2125
■
■
FBMJ3216
■
FBMJ3216HL160NT
70
60
50
40
30
20
10
0
FBMJ4516
■
／
FBMJ4516HL230NT
100
90
80
70
60
50
40
30
20
10
0
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
107
■ ELECTRICAL CHARACTERISTICS
Standard type
FBMH1608
■
FBMH1608HM470-T
FBMH1608HM600-T
FBMH1608HM101-T
FBMH1608HM151-T
200
180
160
140
120
100
80
200
180
160
140
120
100
80
200
180
160
140
120
100
80
600
500
400
Z
300
200
100
0
R
Z
Z
Z
60
60
60
R
R
X
R
40
40
40
X
X
X
20
20
20
0
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
FBMH1608HM221-T
FBMH1608HM331-T
FBMH1608HM471-T
FBMH1608HM601-T
600
500
400
600
500
400
1600
1400
1600
1400
1200
1000
800
1200
1000
800
Z
300
200
100
0
300
200
100
0
Z
R
Z
Z
600
600
R
R
R
X
400
200
400
200
X
X
X
0
0
1
10
100
1000
10000
10000
10000
10000
10000
1
10
100
1000 10000
1
10
100
1000
10000
1
10
100
1000
10000
FBMH1608HM102-T
Z
FBMH1608HL300-T
FBMH1608HL600-T
FBMH1608HL121-T
1600
1400
300
250
200
300
250
200
600
500
400
1200
1000
800
Z
R
Z
R
X
150
100
50
150
100
50
300
200
100
0
R
600
X
Z
R
X
400
200
X
0
0
0
1
10
100
1000
1
10
100
1000 10000
1
10
100
1000 10000
1
10
100
1000 10000
／
FBMH1608HL221-T
FBMH1608HL331-T
FBMH1608HL601
FBMH1608HL471-T
1000
900
1400
1200
1000
2500
2000
1500
1000
500
2000
1800
800
700
1600
1400
R
Z
Z
600
500
400
1200
1000
800
800
600
400
200
Z
Z
R
R
R
300
200
100
600
400
200
X
X
X
X
0
0
0
0
1
10
100
1000
1
10
100
1000
10000
10000
1000
1
10
100
1000
10000
10000
1000
1
10
100
1000
10000
FBMH2012
■
FBMH2012HM800-T
FBMH2012HM121-T
FBMH2012HM221-T
FBMH2012HM331-T
400
350
300
250
200
150
400
350
300
250
200
150
400
350
300
250
200
150
800
600
400
200
0
Z
Z
R
R
X
Z
R
Z
100
50
100
50
100
50
X
R
X
X
0
1
0
0
10
100
1000
1
10
100
1000
1
10
100
1000
10000
1
10
100
1000
FBMH2016
FBMH3216
■
■
FBMH2016HM251NT
FBMH3216HM501NT
FBMH2016HM121NT
FBMH3216HM221NT
800
600
400
200
0
800
600
400
200
0
200
180
160
140
120
100
80
350
300
250
200
150
100
50
Z
R
X
Z
Z
R
R
Z
60
R
40
X
20
X
X
0
1
0
1
1
10
100
1
10
100
10
100
1000
10
100
1000
10000
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
108
■ ELECTRICAL CHARACTERISTICS
Standard type
FBMH3225
FBMH4516
■
■
FBMH3225HM601NT
FBMH3225HM102NT
FBMH3225HM202NT
FBMH4516HM851NT
1200
1000
800
1200
1200
1000
800
2500
2000
1500
1000
500
1000
800
R
R
Z
600
400
200
600
400
200
600
400
200
Z
R
Z
R
Z
X
X
X
X
0
0
0
0
1
1
10
100
1000
1000
1000
1
10
100
1000
1
10
100
1000
10
100
1000
FBMH4525
FBMH4532
■
■
FBMH4525HM102NT
FBMH4525HM162NT
FBMH4532HM681-T
FBM4532HM132-T
1800
1800
1800
1800
1600
1400
1000
1600
1400
1000
1600
1400
1000
1600
1400
1000
1200
800
1200
800
1200
800
1200
800
R
Z
R
Z
R
Z
600
400
600
400
600
400
600
400
Z
R
X
X
X
200
200
0
200
200
X
0
1
0
1
0
1
10
100
1
10
100
1000
10
100
1000
10
100
1000
High current type
■
FBM4532HM202-T
J1608HM180NTR
J1608HS220NTR
40
35
30
25
20
15
10
5
2500
2000
1500
1000
500
30
25
20
15
10
5
Z
Z
Z
R
R
R
X
X
X
0
1
0
1
0
10
100
1000 10000
10
100
1
10
100
1000 10000
／
▶ꢀThisꢀcatalogꢀcontainsꢀtheꢀtypicalꢀspecificationꢀonlyꢀdueꢀtoꢀtheꢀlimitationꢀofꢀspace.ꢀꢀWhenꢀyouꢀconsiderꢀtheꢀpurchaseꢀofꢀourꢀproducts,ꢀpleaseꢀcheckꢀourꢀspecification.ꢀ
Forꢀdetailsꢀofꢀeachꢀproductꢀ(characteristicsꢀgraph,ꢀreliabilityꢀinformation,ꢀprecautionsꢀforꢀuse,ꢀandꢀsoꢀon),ꢀseeꢀourꢀWebꢀsiteꢀ(http://www.ty-top.com/)ꢀ.ꢀ
ꢀ
109
CHIP BEAD INDUCTORS FOR POWER LINES (FB SERIES M TYPE)
■PACKAGING
①Minimum Quantity
Standard Quantity［pcs］
Type
Paper Tape
Embossed Tape
1608（0603）
2125（0805）
2012（0805）
2016（0806）
3216（1206）
4516（1806）
3225（1210）
4525（1810）
4532（1812）
4000
4000
4000
－
－
－
－
2000
2000
2000
1000
1000
2000
－
－
－
－
－
②Tape Material
●Card board carrier tape
●Embossed Tape
③Taping Dimensions
●Paper tape (0.315 inches wide)
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-01
Chip Cavity
Insertion Pitch
F
Tape Thickness
T
Type
A
B
FBMJ1608
FBMH1608
（0603）
1.0±0.2
1.8±0.2
4.0±0.2
1.1max
（0.039±0.008）
（0.071±0.008）
（0.157±0.008）
（0.043max）
FBMJ2125
FBMH2012
（0805）
1.5±0.2
2.3±0.2
4.0±0.2
1.1max
（0.059±0.008）
（0.091±0.008）
（0.157±0.008）
（0.043max）
Unit : mm（inch）
●Embossed tape (0.315 inches wide)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FBMH2016
（0806）
1.8±0.2
（0.071±0.008）
1.9±0.2
2.2±0.2
4.0±0.2
2.6max
0.6max
（0.087±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
1.5max
（0.024max）
0.3max
FBMJ3216
（1206）
（0.075±0.008）
1.9±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FBMH3216
（1206）
（0.075±0.008）
2.8±0.2
（0.138±0.008）
3.5±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FBMH3225
（1210）
（0.110±0.008）
（0.138±0.008）
（0.157±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
●Embossed tape (0.472 inches wide)
Chip Cavity
Insertion Pitch
F
Tape Thickness
Type
A
B
K
T
FBMJ4516
（1806）
1.9±0.2
（0.075±0.008）
1.9±0.2
4.9±0.2
4.0±0.2
1.5max
0.3max
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.059max）
2.6max
（0.012max）
0.6max
FBMH4516
（1806）
（0.075±0.008）
2.9±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
4.0±0.2
（0.102max）
4.0max
（0.024max）
0.6max
FBMH4525
（1810）
（0.114±0.008）
3.6±0.2
（0.193±0.008）
4.9±0.2
（0.157±0.008）
8.0±0.2
（0.157max）
4.0max
（0.024max）
0.6max
FBMH4532
（1812）
（0.142±0.008）
（0.193±0.008）
（0.315±0.008）
（0.157max）
（0.024max）
Unit : mm（inch）
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-01
④Leader and Blank portion
⑤Reel size
Type
φA
φB
W
FBMJ1608
FBMJ2125
FBMJ3216
10.0±1.5
（0.394±0.047）
14.0±1.5
FBMJ4516
（0.551±0.059）
FBMH1608
FBMH2012
FBMH2016
FBMH3216
FBMH3225
FBMH4516
FBMH4525
180＋0/－3
60＋1/－0
（7.09＋0/－0.118 ）
（2.36＋0.039/－0 ）
10.0±1.5
（0.394±0.047）
14.0±1.5
（0.551±0.059）
14±2.0
330±2.0
100±1.0
FBMH4532
（12.99±0.080）
（3.94±0.039）
（0.551±0.080）
Unit : mm（inch）
⑥Top tape strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_pack_e-01
CHIP BEAD INDUCTORS FOR POWER LINE (FB SERIES M TYPE)
■RELIABILITY DATA
1. Operating Temperature Range
－40℃～＋125℃
Specified Value
Including self-generated heat
2. Storage Temperature Range
Specified Value
－40℃～＋85℃
Test Methods and
Remarks
*Note: 0 to ＋40℃ in taped packaging
3. Impedance
Specified Value
Within the specified tolerance
Test Methods and Measuring equipment
: Impedance analyzer (HP4291A) or its equivalent
: 100±1 MHz
Remarks
Measuring frequency
4. DC Resistance
Specified Value
Within the specified range
Test Methods and Four-terminal method
Remarks
Measuring equipment : Milliohm High-Tester 3226 (Hioki Denki) or its equivalent
5. Rated Current
Specified Value
Within the specified range
6. Vibration
Appearance
: No significant abnormality
Specified Value
Impedance change
: Within ±30% of the initial value
According to JIS C 0040.
Vibration type
: A
Test Methods and Time
: 2 hrs each in X,Y, and Z directions Total: 6 hrs
: 10 to 55 to 10Hz (/min.)
: 1.5 mm (shall not exceed acceleration 196m/s2)
Remarks
Frequency range
Amplitude
Mounting method
: Soldering onto PC board
7. Solderability
Specified Value
90% or more of immersed surface of terminal electrode shall be covered with fresh solder.
Solder temperature
Test Methods and Immersion time
: 230±5℃
: 4±1 sec.
Remarks
Preconditioning
: Immersion into flux.
: 25mm/sec.
Immersion and Removal speed
8. Resistance to Soldering Heat
Appearance
: No significant abnormality
Specified Value
Impedance change
Preheating
Resistance to Soldering Heat
Test Methods and Duration
: Within ±30% of the initial value
: 150℃ for 3 min.
: 260±5℃
: 10±0.5 sec.
Remarks
Preconditioning
: Immersion into flux.
Immersion and Removal speed
Recovery
: 25mm/sec.
: 2 to 3 hrs of recovery under the standard condition after the test.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-01
9. Thermal Shock
Specified Value
Appearance
: No significant abnormality
Impedance change
: Within＋50/－10% of the initial value
According to JIS C 0025.
Conditions for 1 cycle
Sep
1
Temperature (℃)
－40±3℃
Duration (min.)
30±3
Within 3
30±3
2
Room Temperature
85±2℃
Test Methods and
Remarks
3
4
Room Temperature
Within 3
Number of cycles
Mounting method
Recovery
: 100
: Soldering onto PC board
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
10. Resistance to Humidity (steady state)
Appearances
Specified Value
: No significant abnormality
Impedance change
: Within ±30% of the initial value
Temperature
: 40±2℃
Humidit
Test Methods and
Duration
: 90 to 95% RH
: 500＋24/－0
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
11. Loading under Damp Heat
Appearance
Specified Value
No significant abnormality
Impedance change
Within ±30% of the initial value
Temperature
Humidity
: 40±2℃
: 90 to 95%RH
Test Methods and Applied current
: Rated current
Remarks
Duration
: 500＋24/－0 hrs
Mounting method
Recovery
: Soldering oto PC board
: 2 to 3hrs of recovery under the standard condition after the removal from test chamber.
12. High Temperature Loading Test
Appearance
Specified Value
: No significant abnormality
Impedance change
: Within ±30% of the initial value
Temperature
: 85±2℃
Duration
Test Methods and
Applied current
: 500＋24/－0 hrs
: Rated current
Remarks
Mounting method
: Soldering onto PC board
Recovery
: 2 to 3 hrs of recovery under the standard condition after the removal from test chamber.
13. Bending Strength
Specified Value
Appearance : No mechanical damage.
Warp : 2mm
Testing board : Glass epoxy-resin substrate
Thickness : 0.8mm
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-01
14. Adhesion of Electrode
Specified Value
No separation or indication of separation of electrode.
Applied force
Duration
: 5N
: 10 sec.
Test Methods and
Remarks
Note on standard condition: "standard condition" referred to herein is defined as follows:
5 to 35℃ of temperature, 45 to 85% relative humidity and 86 to 106kPa of air pressure.
When there are questions concerning measurement results:
In order to provide correlation data, the test shall be conducted under condition of 20±2℃ of temperature, 60 to 70% relative humidity and 86 to 106kPa of air
pressure. Unless otherwise specified, all the tests are conducted under the "standard condition."
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_reli_e-01
CHIP BEAD INDUCTORS FOR POWER LINE （FB SERIES M TYPE）
■PRECAUTIONS
1. Circuit Design
◆Operating environment
1. The products described in this specification are intended for use in general electronic equipment, (office supply equipment,
telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical
equipment or systems requiring special quality and high reliability (traffic systems, safety equipment, aerospace systems, nuclear
control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or
Precautions
damage. For such uses, contact TAIYO YUDEN Sales Department in advance.
◆Rated current
1. Rated current of this product is shown in this catalogue, but please be sure to have the base board designed with adequate inspection in
case of the generation of heat becomes high within the rated current range when the base board is in high resistance or in bad heating
conditions.
2. PCB Design
◆Land pattern design
Precautions
1. Please refer to a recommended land pattern.
3. Considerations for automatic placement
◆Adjustment of mounting machine
Precautions
1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.
2. Mounting and soldering conditions should be checked beforehand.
Technical
◆Adjustment of mounting machine
considerations
1. When installing products, care should be taken not to apply distortion stress as it may deform the products.
4. Soldering
◆Wave soldering
1. Please refer to the specifications in the catalog for a wave soldering.
◆Reflow soldering
1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified.
◆Lead free soldering
1. When using products with lead free soldering, we request to use them after confirming adhesion, temperature of resistance to soldering
heat, etc. sufficiently.
Precautions
◆Preheating when soldering
Heating : The temperature difference between soldering and remaining heat should not be greater than 150℃.
Cooling : The temperature difference between the components and cleaning process should not be greater than 100℃.
◆Recommended conditions for using a soldering iron
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350℃
Duration - 3 seconds or less
The soldering iron should not directly touch the inductor.
◆Wave, Reflow, Lead free soldering
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
Technical
considerations
◆Preheating when soldering
1. There is a case that products get damaged by a heat shock.
◆Recommended conditions for using a soldering iron
1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently
degrade the reliability of the products.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-01
5. Handling
◆Handling
1. Keep the inductors away from all magnets and magnetic objects.
◆Setting PC boards
1. When setting a chip mounted base board, please make sure that there is no residual stress to the chip by distortion in the board or at
screw part.
Precautions
◆Breakaway PC boards (splitting along perforations)
1. When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deflection or twisting to the
board.
2. Board separation should not be done manually, but by using the appropriate devices.
◆Mechanical considerations
1. Please do not give the inductors any excessive mechanical shocks.
◆Handling
1. There is a case that a characteristic varies with magnetic influence.
◆Setting PC boards
Technical
1. There is a case that a characteristic varies with residual stress.
◆Breakaway PC boards (splitting along perforations)
1. Planning pattern configurations and the position of products should be carefully performed to minimize stress.
◆Mechanical considerations
considerations
1. There is a case to be damaged by a mechanical shock.
6. Storage conditions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the
storage area should be controlled.
・Recommended conditions
Precautions
Ambient temperature 0～40℃
Humidity Below 70% RH
The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may
decrease as time passes.
For this reason, inductors should be used within 6 months from the time of delivery.
◆Storage
Technical
1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes
and deterioration of taping/packaging materials may take place.
considerations
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
chipbeads_prec_e-01
相关型号：
FCFBMH4525HM102NT
Ferrite Chip, 1 Function(s), 3A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1810, 2 PIN
TAIYO YUDEN
FCFBMH4525HM162NT
Ferrite Chip, 1 Function(s), 2A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1810, 2 PIN
TAIYO YUDEN
FCFBMH4532HM132-T
Ferrite Chip, 1 Function(s), 3A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1812, 2 PIN
TAIYO YUDEN
FCFBMJ1608HS280NT
Ferrite Chip, 1 Function(s), 4A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0603, 2 PIN
TAIYO YUDEN
FCFBMJ2125HL8R0NT
Ferrite Chip, 1 Function(s), 2A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TAIYO YUDEN
FCFBMJ2125HM210NT
Ferrite Chip, 1 Function(s), 6A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TAIYO YUDEN
FCFBMJ2125HM330-T
Ferrite Chip, 1 Function(s), 4A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TAIYO YUDEN
FCFBMJ2125HS250NT
Ferrite Chip, 1 Function(s), 6A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TAIYO YUDEN
FCFBMJ2125HS420-T
Ferrite Chip, 1 Function(s), 4A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 0805, 2 PIN
TAIYO YUDEN
FCFBMJ3216HM380NT
Ferrite Chip, 1 Function(s), 6A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1206, 2 PIN
TAIYO YUDEN
FCFBMJ3216HM600-T
Ferrite Chip, 1 Function(s), 4A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1206, 2 PIN
TAIYO YUDEN
FCFBMJ3216HS480NT
Ferrite Chip, 1 Function(s), 6A, ROHS COMPLIANT, EIA STD PACKAGE SIZE 1206, 2 PIN
TAIYO YUDEN
©2020 ICPDF网 联系我们和版权申明